Work Instructions For SPILLCLEAN^® & Fireman’s Brand Oil B-Dry^®

Removal of Petroleum-Based Spills and Gasoline from Cement, Asphalt, Roads, and Highways

Instructions for use of Fireman’s Brand SPILLCLEAN^®

1. Use broom or other containment prior to application of SPILLCLEAN^® to prevent the SPILLCLEAN^® oil or gasoline mixture from spreading or possibly reaching open water.
   
   
2. Apply SPILLCLEAN^® liberally to oil or gasoline spill.
   
   
3. Using a broom, mix the SPILLCLEAN^® well into the spill. The SPILLCLEAN^® will surround each of the oil or gasoline molecules and separate it from the hard surface. Do not mix SPILLCLEAN^® with any other cleaner or allow other cleaners to contact affected surfaces while SPILLCLEAN^® is in use.
   
   Note: If the oil spill seeps deep into the pores of the hard surface, repeat steps two through four as many times as necessary to remove the spill completely.
   
   
4. Dispose of SPILLCLEAN^® oil or gasoline mixture from site according to federal, state, and local regulations.
   
   
5. Let clean surface dry.
   
   
   

STEP 1

Locate and contain oil spill

STEP 2

Apply SPILLCLEAN^® liberally to cover spill completely

STEP 3

Broom SPILLCLEAN^® into spill to emulsify the oil

STEP 4

Rinse and dispose in accordance with federal, state, and local regulations

STEP 5

Let dry

Instructions for use of Fireman’s Brand OIL B-DRY^®

1. Use broom or other containment prior to application of SPILLCLEAN^® to prevent the SPILLCLEAN^® oil or gasolene mixture from spreading or possibly reaching open water.
   
   
2. Apply the dry, granular OIL B-DRY^® liberally to oil or gasolene spill. The OIL B-DRY^® will absorb about 90% of the spill.
   
   
3. Using a shovel or wet vacuum, pick up the OIL B-DRY^® oil or gasolene spill, and dispose of accordance with federal, state, and local regulations
   
   
4. Apply SPILLCLEAN^® liberally to remaining oil or gasolene spill. Using a broom, mix the SPILLCLEAN^® well into the spill. The SPILLCLEAN^® will surround each of the remaining oil or gasoline molecules and separate it from the hard surface. Do not mix SPILLCLEAN^® with any other cleaner or allow other cleaners to contact affected surfaces while SPILLCLEAN^® is in use.
   
   Note: If the oil spill seeps deep into the pores of the hard surface, repeat step four as many times as necessary to remove the spill completely.
   Dispose of SPILLCLEAN^® oil or gasolene mixture from site according to federal, state, and local regulations.
   
   
5. Let cleaned surface dry
   
   
   

STEP 1

Locate and contain the oil spill

STEP 2

Apply OIL B-DRY^® liberally to the spill and allow it to absorb the bulk of the spill

STEP 3

Shovel or sweep spill OIL B-DRY^® mixture and discard in accordance with federal, state, and local regulations

STEP 4

Apply SPILLCLEAN^® to the remaining spill, broom in place, and rinse with water

STEP 5

Let dry

For additional questions contact us at 414-840-9223